Skip to content

Oracle Applications (EBS) R12.2 Cloning process

R12.2 follows somewhat new process of Cloning on Application Tier. Although most of the clone steps are same as were in 11i/R12.1 but some of the steps are new. For example, you need to copy application file system two times, one from source application RUN file system to target RUN file system and then again from target RUN file system to target PATCH file system. Below we will cover both database and application tier clone although database cloning process is same as was in 11i/R12.1.

This document is divided into below sub-parts:


 

ENVIRONMENT
PART 1 : PREREQUISITE TASKS
PART 2 : PREPARE SOURCE SYSTEM
PART 3 : COPY APPLICATION TIER NODE
PART 4 : COPY DATABASE TIER NODE
PART 5 : CONFIGURE TARGET DATABASE SYSTEM
PART 6 : CONFIGURE TARGET APPLICATION SYSTEM
PART 7 : FINISHING TASKS
ISSUES FACED
REFERENCE


 

ENVIRONMENT

EBS version : R12.2.3

SOURCE SYSTEM:

Two node system ( 1 database node, 1 application node)

Source Database node: dbhost.corp.com
Source Database node OS user: oradba
Source Application node: apphost.corp.com
Source Application node OS user: appdba
Source Database ORACLE_SID: dba
Source Database ORACLE_HOME: /u01/oracle/findba/11.2.0
Source Application $RUN_BASE : /u01/oracle/findba/fs2
Source Application $PATCH_BASE : /u01/oracle/findba/fs1
Port Pool : 6 (RUN file system), 7 (PATCH file system)

TARGET SYSTEM:

Two node system ( 1 database node, 1 application node)

Target Database node: dbclonehost.corp.com
Target Database node OS user: oraclone
Target Application node: appclonehost.corp.com
Target Application node OS user: appclone
Target Database ORACLE_SID: clonedb
Target Database ORACLE_HOME: /d01/oracle/finclonedb/11.2.0
Target Application $RUN_BASE : /d01/oracle/finclonedb/fs2
Target Application $PATCH_BASE : /d01/oracle/finclonedb/fs1
Port Pool : 9 (RUN file system), 8 (PATCH file system)

Assumption:

· Both source and target EBS R12.2 system have 1 database node and 1 application node
· RMAN is used for taking source backup and to create target database. You can also use some other snapshot/mirroring advance technology for database backup.
· Oracle database software is already intalled on the Target database node.
· Source database is running in archive log enabled mode.

PART 1 : PREREQUISITE TASKS

1.1 Check for in-progress online patching cycle

On the Source system, there should not be any in-progress online patching cycle. Online patching should be done till cleanup stage and also fs_clone should be run to synchronize with the application file system RUN and PATCH.

You can check it easily by below command:

SQL> select ADOP_SESSION_ID,PREPARE_STATUS,APPLY_STATUS,FINALIZE_STATUS,CUTOVER_STATUS,CLEANUP_STATUS,ABORT_STATUS,STATUS,ABANDON_FLAG,NODE_NAME from AD_ADOP_SESSIONS order by ADOP_SESSION_ID;
ADOP_SESSION_ID P A F C C A S ABANDON_FLAG NODE_NAME
 --------------- - - - - - - - ------------ -------------------------------------------------------------------
 2 X Y N X Y X C apphost
 3 R N R N Y Y C apphost
 5 Y P N N Y Y C apphost
 6 Y P N N Y Y C apphost
 7 Y P N N Y Y C apphost
 8 X Y N X Y X C apphost
 10 Y P N N Y Y C apphost
 11 Y Y Y Y Y X C apphost

8 rows selected.

As can be seen above last online patching session (11) was done successfully till cleanup stage (marked as Y).

1.2 Check Disk Space on the Source system and Target

On the source system, as per Oracle recommendation require 6GB in /tmp and 6GB under $COMMON_TOP. adpreclone will create backup of important source instance file under $COMMON_TOP and it require minimum 6 GB space there.

On the target system file system space should match as that of source.

 

1.3 OS and Patch Level

Source and Target must be on the same Operating System (OS) and patch level

1.4 AD/TXK Patches

Apply the latest AD/TXK patches to the Source system.

You can check the lastet version by below SQL statement.

SQL> SELECT abbreviation,codelevel FROM AD_TRACKABLE_ENTITIES WHERE abbreviation in (‘txk’,’ad’);

ABBREVIA CODELEVEL
——– ———-
ad C.4
txk C.4

1.5 Maintain snapshot information

Log in to each Source Application Tier node as the APPLMGR user, and run “Update current view snapshot” in AD Administration.
adadmin > “2. Maintain Applications Files menu” > “4. Maintain snapshot information” > “2. Update current view snapshot” > “1. Update Complete APPL_TOP”

This process can take up to an hour.

 

PART 2 : PREPARE SOURCE SYSTEM

2.1 Prepare the Source System database tier for cloning

Log on to the Source database System as the oracle user, and run the following commands:

$ cd $ORACLE_HOME/appsutil/scripts/$CONTEXT_NAME
$ perl adpreclone.pl dbTier

This process will take less than 5 minutes.

2.2 Prepare the Source System application tier for cloning

Log on to the run edition file system in the Source System as the applmgr user, and run the following commands on each node that contains an APPL_TOP:

First confirm if you are accessing run file system:

$ echo $FILE_EDITION

It should return the value:

run

Now run:

$ cd $INST_TOP/admin/scripts

$ perl adpreclone.pl appsTier

**require Apps User password and Weblogic AdminServer password

When run for the first time, this process can take up to 15 min and will add 3-4 GB more data under $COMMON_TOP.


 

What will adpreclone do on Application Tier?

In 12.2, the adpreclone.pl process on the application tier creates a complete compressed archive of the Oracle Fusion Middleware and its components

A compressed archive of the Oracle WebLogic Server home, Oracle Web Tier Utilities home, Oracle Common Utilities home and the Oracle E-Business Suite home:

<COMMON_TOP>/clone/FMW/FMW_Home.jar

A compressed archive of the Oracle E-Business Suite WebLogic domain:

<COMMON_TOP>/clone/FMW/WLS/EBSdomain.jar

The Oracle E-Business Suite WebLogic domain’s configuration template:

<COMMON_TOP>/clone/FMW/WLS/plan/moveplan.xml

A compressed archive of the Oracle Web Tier/Oracle HTTP Server configuration instance:

<COMMON_TOP>/clone/FMW/OHS/ohsarchive.jar

The Oracle HTTP Server configuration instance’s configuration template:

<COMMON_TOP>/clone/FMW/OHS/moveplan.xml


 

PART 3 : COPY APPLICATION TIER NODE

How Application tier copy process is different in R12.2 as compared to R12.1.3?

In R12.2 since we have two file systems, RUN and PATCH, the copy process is executed two times

1. Copy Application Tier node from the Source “Run Edition File System” to the Target “Run Edition File System”.

2. Copy the Application Tier node from the Target “Run Edition File System” to the Target “Patch Edition File System”.


3.1 BACKUP SOURCE APPLICATION TIER

Log on to run edition file system in the Source System application tier nodes as the applmgr user or equivalent user.

Copy the EBSapps application tier directory from the Source Node to the target run edition file system application tier node

EBSapps directory contains <APPL_TOP> , <COMMON_TOP> and <OracleAS Tools 10.1.2 ORACLE_HOME>. EBSapps directory to be copied is located under run edition file system ($RUN_BASE ).

In our case run edition file system is > /u01/oracle/findba/fs2

[appdba@apphost fs2]$ echo $RUN_BASE

/u01/oracle/findba/fs2

[appdba@apphost fs2]$ cd $RUN_BASE

[appdba@apphost fs2]$ ls -tlr

total 12

drwxr-x— 3 appdba dba 4096 May 21 20:15 inst <<< DO NOT COPY

drwxr-x— 5 appdba dba 4096 Jun 8 15:37 EBSapps <<<<<<< DIRECTORY TO COPY

drwxr-x— 13 appdba dba 4096 Jun 8 15:57 FMW_Home <<< DO NOT COPY

You can use tar command like below to make a compressed copy of this directory.

$ nohup tar cvfz /home/appdba/dba_APPS_`date +%m%d%y`.tar.gz /u01/oracle/findba/fs2/EBSapps &

Consult the UNIX man page for the tar command to check the parameters available on your platform.

REMEMBER: If the source run edition file system is the first file system (fs1), the target run edition file system will also be the first file system (fs1). Similarly, if the source run edition file system is the second file system (fs2) (like in our case), then the target run edition file system will also be the second file system (fs2). Therefore, when you perform a cloning task, you always clone and copy the source run edition file system to create the target run edition file system, but the directory location of the run edition file system can be pointing either to <s_base>/<sid>/fs1 or <s_base>/<sid>/fs2 based on the source run edition file system base directory.

3.2 STOP TARGET APPLICATION SYSTEM SERVICES

If target application system is still running, you can stop it with below commands.

$ cd $INST_TOP/admin/scripts
$ ./adstapall.sh apps/<apps_password>

3.3 CLEANUP TARGET APPLCIATION FILE SYSTEM

Remove application directory structure from under $RUN_BASE and $PATCH_BASE in the target application tier system.

3.4 COPY APPS FILESYSTEM BACKUP FROM SOURCE TO TARGET

scp the zip file generated in source application tier to the target application node.

Login to the source application tier and scp the apps backup file.

Example:

scp dba_apps_22apr13.tar.gz appclone@appclonehost: /tmp

3.5 RESTORE THE APPS FILESYSTEM ON TARGET NODE

Extract the backup by tar command

Example:

$ nohup tar xvfz /tmp/dba_apps_22apr13.tar.gz &

 

PART 4 : COPY DATABASE TIER NODE

For copying the database tier node from source to target database you can always follow the easiest approach of copying the database files from source to target database by first shutting down the source database system. But not all DBAs have the luxury to take down Production database just to refresh a non-production database. We also will not be taking down source database in our example and will go for RMAN hot backup cloning.

4.1 STOP TARGT DATABASE

Login to target Database node as oracle or equivalent user.

$ sqlplus / as sysdba

SQL> shutdown immediate

4.2 CLEANUP TARGET DATABASE FIILE

Delete all target data files. Also check control_file & log_file location and remove them too.

Use simple rm –rf command to delete these database files

4.3 TAKE RMAN BACKUP OF SOURCE DATABASE

In our system we have one UNIX crontab already running with below RMAN script which takes database backup overnight.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

#! /bin/bash
. /u01/oracle/dba/db/tech_st/11.2.0/dba_dbhost.env/u01/oracle/dba/db/tech_st/11.2.0/bin/rman target=/ catalog=rman_user/<rman_user_password>@<catalog_SID> << EOFRUN

{

sql “alter system archive log current”;

allocate channel t1 DEVICE TYPE DISK FORMAT ‘/oradb/dba_backups/rman/%U’;

allocate channel t2 DEVICE TYPE DISK FORMAT ‘/oradb/dba_backups/rman/%U’;

allocate channel t3 DEVICE TYPE DISK FORMAT ‘/oradb/dba_backups/rman/%U’;

BACKUP AS COMPRESSED BACKUPSET DATABASE PLUS ARCHIVELOG;

CROSSCHECK BACKUP;

DELETE NOPROMPT OBSOLETE;

}

EXIT;

EOF

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Use similar kind of RMAN commands to take RMAN database backup of source system.

We have catalog database also but you may or may not have it and it doesn’t matter.

4.4 COPY RMAN BACKUP PIECES TO TARGET NODE

Example:

Login to source database server:

cd /<source_rman_bakcup_location>

scp <backup_pieces> oraclone@dbclonehost.corp.com:/backups/rman_dba_17SEP14

4.5 CREATE PARAMETER FILE ON TARGET NODE

You can use the target pfile backup if you kept. Backup and remove any spfile from $ORACLE_HOME/dbs directory in the target node if your earlier target database was using spfile.

Add/edit following entry in the init file if not already present.

DB_FILE_NAME_CONVERT=’source_db_location_path’,'<target_db_location_path>’

LOG_FILE_NAME_CONVERT=’source_log_location_path’,'<target_log_location_path>’

4.6 START TARGET DATABASE IN NOMOUNT MODE

Login to the target database node with oracle (or equivalent) user and start the database in nomount mode

$ sqlplus / as sysdba

SQL> startup nomount

4.7 CREATE DUPLICATE TARGET DATABASE BY RMAN

Start the RMAN session from the first target database node by oracle (or equivalent) user.

$ rman log=/home/oraclone/rman_22SEP14.log

RMAN> connect auxiliary /
RMAN> RUN
{
DUPLICATE TARGET DATABASE to clonedb BACKUP LOCATION ‘/oradb/dba_backups/rman’ NOFILENAMECHECK ;
}

Where /oradb/dba_backups/rman is the backup location where we kept the rman source database backup pieces.

RMAN process will create the duplicate database and opens it for you.

PART 5 : CONFIGURE TARGET DATABASE SYSTEM

5.1 DE-REGISTER THE CURRENT CONFIGURATION

As the APPS user, run the following command to de-register the current configuration:

Login from target database node:

$ sqlplus apps/<PASSWORD>

SQL> create table fnd_nodes_22ep14 as select * from fnd_nodes;

SQL> exec fnd_conc_clone.setup_clean;

PL/SQL procedure successfully completed.

SQL> commit;

Commit complete.

5.2 EXECUTE AUTOCONFIG ON TARGET DATABASE NODE

On the target database node from the $ORACLE_HOME/appsutil/bin directory, execute AutoConfig on the database tier by running the adconfig.pl script.

$ cd $ORACLE_HOME/appsutil/bin
$ perl adconfig.pl dbTier

Check the AutoConfig log file located at below location for any errors.

<11gR2ORACLE_HOME>/appsutil/log/<CONTEXT_NAME>/<MMDDhhmm>

Also check the CONTEXT_FILE which will get generated under $ORACLE_HOME/apputil

You can now include the generated env file (under $ORACLE_HOME) path in the .profile of the oracle user so that all required environment variables get exported automatically on user login.

WORK LOG>
$ perl adcfgclone.pl dbTier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.7.1202010.2
Enter the APPS password :
Running:
/d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/java:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_17336.lst -stage /d01/oracle/finclonedb/11.2.0/appsutil/clone 2> /tmp/adcfgclone_17336.err; echo $? > /tmp/adcfgclone_17336.res
Log file located at /d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/CloneContext_0922153542.log
Provide the values required for creation of the new Database Context file.
Target System Hostname (virtual or normal) [dbclonehost] :
Target Instance is RAC (y/n) [n] :
Target System Database SID : clonedb
Target System Base Directory : /d01/oracle/finclonedb
Target System utl_file_dir Directory List : /usr/tmp
Number of DATA_TOP’s on the Target System [1] :
Target System DATA_TOP Directory 1 [/oradb/u06/oracle/findba/db/apps_st/data] : /oradb/d01/oracle/finclonedb/db/apps_st/data
Target System RDBMS ORACLE_HOME Directory [/d01/oracle/finclonedb/11.2.0] :
Do you want to preserve the Display [null] (y/n) : n
Target System Display [dbclonehost:0.0] : 0:0
Target System Port Pool [0-99] : 9
Checking the port pool 9
done: Port Pool 9 is free
Report file located at /d01/oracle/finclonedb/11.2.0/appsutil/temp/portpool.lst
Complete port information available at /d01/oracle/finclonedb/11.2.0/appsutil/temp/portpool.lst
Creating the new Database Context file from :
/d01/oracle/finclonedb/11.2.0/appsutil/template/adxdbctx.tmp
The new database context file has been created :
/d01/oracle/finclonedb/11.2.0/appsutil/clonedb_dbclonehost.xml
Log file located at /d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/CloneContext_0922153542.log
Check Clone Context logfile /d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/CloneContext_0922153542.log for details.
Running Rapid Clone with command:
Running:
perl /d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/adclone.pl java=/d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/../jre mode=apply stage=/d01/oracle/finclonedb/11.2.0/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/d01/oracle/finclonedb/11.2.0/appsutil/clonedb_dbclonehost.xml showProgress contextValidated=true
Beginning database tier Apply – Mon Sep 22 15:38:36 2014
/d01/oracle/finclonedb/11.2.0/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/d01/oracle/finclonedb/11.2.0/oui -classpath /d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/ojdbc6.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/java:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/oui/OraInstaller.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/oui/ewt3.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/oui/share.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/oui/srvm.jar:/d01/oracle/finclonedb/11.2.0/appsutil/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyDBTier -e /d01/oracle/finclonedb/11.2.0/appsutil/clonedb_dbclonehost.xml -stage /d01/oracle/finclonedb/11.2.0/appsutil/clone -showProgress
APPS Password : Log file located at /d01/oracle/finclonedb/11.2.0/appsutil/log/clonedb_dbclonehost/ApplyDBTier_09221538.log
\ 50% completed
Completed Apply…
Mon Sep 22 15:41:49 2014
Starting database listener for clonedb:
Running:
/d01/oracle/finclonedb/11.2.0/appsutil/scripts/clonedb_dbclonehost/addlnctl.sh start clonedb
Logfile: /d01/oracle/finclonedb/11.2.0/appsutil/log/clonedb_dbclonehost/addlnctl.txt
You are running addlnctl.sh version 120.4
Starting listener process clonedb …
Listener clonedb has already been started.
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /d01/oracle/finclonedb/11.2.0/appsutil/log/clonedb_dbclonehost/addlnctl.txt for more information …

PART 6 : CONFIGURE TARGET APPLICATION SYSTEM

6.1 RUN ADCFGCLONE ON TARGET APPLICATION NODE RUN EDITION

Login to apps node by applmgr (or equivalent) user.

$ cd $COMMON_TOP/clone/bin

Example :

$ cd /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin

$ perl adcfgclone.pl appsTier

**require Apps User password and Weblogic AdminServer password

Work Log >
[appclone@appclonehost bin]$ perl adcfgclone.pl appsTier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.30
Enter the APPS password :
Running:
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt
Enter the Weblogic AdminServer password :
Running:
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../FMW/tempinfo.txt
Running:
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../FMW/EBSDataSource
Do you want to add a node (yes/no) [no] :
Running:
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -cp /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojdbc5.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext -e /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_17296.lst -stage /d01/oracle/finclonedb/fs2/EBSapps/comn/clone 2> /tmp/adcfgclone_17296.err; echo $? > /tmp/adcfgclone_17296.res
Log file located at /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/CloneContext_0922155439.log
Target System File Edition type [run] :
Provide the values required for creation of the new APPL_TOP Context file.
Target System Hostname (virtual or normal) [appclonehost] :
Target System Database SID : clonedb
Target System Database Server Node [appclonehost] : dbhost
Target System Database Domain Name [corp.com] :
Target System Base Directory : /d01/oracle/finclonedb
Target System Base Directory set to /d01/oracle/finclonedb
Target System Current File System Base set to /d01/oracle/finclonedb/fs2
Target System Other File System Base set to /d01/oracle/finclonedb/fs1
Target System Fusion Middleware Home set to /d01/oracle/finclonedb/fs2/FMW_Home
Target System Web Oracle Home set to /d01/oracle/finclonedb/fs2/FMW_Home/webtier
Target System Appl TOP set to /d01/oracle/finclonedb/fs2/EBSapps/appl
Target System COMMON TOP set to /d01/oracle/finclonedb/fs2/EBSapps/comn
Target System Instance Home Directory [/d01/oracle/finclonedb] :
Target System Instance Top set to /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost
Do you want to preserve the Display [appclonehost:0.0] (y/n) : n
Target System Display [appclonehost:0.0] : 0:0
Target System Root Service [enabled] :
Target System Web Administration [enabled] :
Target System Web Entry Point Services [enabled] :
Target System Web Application Services [enabled] :
Target System Batch Processing Services [enabled] :
Target System Other Services [disabled] :
Target System Port Pool [0-99] : 9
Checking the port pool 9
done: Port Pool 9 is free
Report file located at /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/out/portpool.lst
Complete port information available at /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/out/portpool.lst
UTL_FILE_DIR on database tier consists of the following directories.
1. /usr/tmp
2. /usr/tmp
3. /d01/oracle/finclonedb/11.2.0/appsutil/outbound/clonedb_dbclonehost
4. /usr/tmp
Choose a value which will be set as APPLPTMP value on the target node [1] :
Creating the new APPL_TOP Context file from :
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/context/apps/adxmlctx.tmp
The new APPL_TOP context file has been created :
/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml
Log file located at /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/CloneContext_0922155439.log
Check Clone Context logfile /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/CloneContext_0922155439.log for details.
Running Rapid Clone with command:
Running:
perl /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/adclone.pl java=/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre mode=apply stage=/d01/oracle/finclonedb/fs2/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml showProgress contextValidated=true
FMW Pre-requisite check log file location : /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log
Running: /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -stage /d01/oracle/finclonedb/fs2/EBSapps/comn/clone -log /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/FMW/logs/prereqcheck.log
Beginning application tier Apply – Mon Sep 22 15:56:32 2014
/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojdbc6.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/oui/ewt3.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/oui/share.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/clone/jlib/obfuscatepassword.jar oracle.apps.ad.clone.ApplyAppsTier -e /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -stage /d01/oracle/finclonedb/fs2/EBSapps/comn/clone -showProgress -nopromptmsg
Log file located at /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/log/clone/ApplyAppsTier_09221556.log
/ 100% completed
Completed Apply…
Mon Sep 22 16:13:27 2014
Executing command: /d01/oracle/finclonedb/fs2/EBSapps/10.1.2/bin/sqlplus @/d01/oracle/finclonedb/fs2/EBSapps/appl/ad/12.0.0/patch/115/sql/truncate_ad_nodes_config_status.sql
Do you want to startup the Application Services for clonedb? (y/n) [n] : y
Starting application Services for clonedb:
Running:
/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/scripts/adstrtal.sh -nopromptmsg
You are running adstrtal.sh version 120.24.12020000.9
The logfile for this session is located at /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/logs/appl/admin/log/adstrtal.log
Executing service control script:
/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/scripts/jtffmctl.sh start
Timeout specified in context file: 100 second(s)
—–
All services will start up sequentially
—-
All enabled services for this node are started.
adstrtal.sh: Exiting with status 0
adstrtal.sh: check the logfile /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/logs/appl/admin/log/adstrtal.log for more information …
6.2 RUN ADPRECLONE ON RUN EDITION (NEW STEP IN R12.2)

Run adpreclone.pl on the run edition file system in the Target System.

$ echo $FILE_EDITION

Run

$ cd $ADMIN_SCRIPTS_HOME

$ adpreclone.pl appsTier

**require Apps User password and Weblogic AdminServer password

Work Log >
[appclone@appclonehost scripts]$ adpreclone.pl appsTier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adpreclone Version 120.31.12020000.15
Enter the APPS User Password:
Enter the Weblogic AdminServer password :
Checking the status of the Oracle WebLogic Administration Server….
Running perl /d01/oracle/finclonedb/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/adProvisionEBS.pl ebs-get-serverstatus -contextfile=/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -servername=AdminServer -promptmsg=hide
The Oracle WebLogic Administration Server is up.
Running:
perl /d01/oracle/finclonedb/fs2/EBSapps/appl/ad/12.0.0/bin/adclone.pl java=/d01/oracle/finclonedb/fs2/FMW_Home/jrockit64 mode=stage stage=/d01/oracle/finclonedb/fs2/EBSapps/comn/clone component=appsTier method= appctx=/d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml showProgress
Setting the wls environment
Beginning application tier Stage – Mon Sep 22 16:30:19 2014
/d01/oracle/finclonedb/fs2/FMW_Home/jrockit64/bin/java -Xmx600M -DCONTEXT_VALIDATED=false -Doracle.installer.oui_loc=/oui -classpath /d01/oracle/finclonedb/fs2/FMW_Home/webtier/lib/xmlparserv2.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/jdbc/lib/ojdbc6.jar:/d01/oracle/finclonedb/fs2/EBSapps/comn/java/classes:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/oui/jlib/OraInstaller.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/oui/jlib/ewt3.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/oui/jlib/share.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/d01/oracle/finclonedb/fs2/FMW_Home/webtier/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs2/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:/d01/oracle/finclonedb/fs2/FMW_Home/oracle_common/jlib/obfuscatepassword.jar oracle.apps.ad.clone.StageAppsTier -e /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -stage /d01/oracle/finclonedb/fs2/EBSapps/comn/clone -tmp /tmp -method CUSTOM -showProgress -nopromptmsg
Log file located at /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/admin/log/clone/StageAppsTier_09221630.log
| 20% completed
Completed Stage…
Mon Sep 22 16:37:10 2014
6.3 SHUTDOWN THE APPLICATION WHICH WAS STARTED IN STEP 6.1

cd $ADMIN_SCRIPTS_HOME

./adstpall.sh apps/<apps_password>
**require Apps User password and Weblogic AdminServer password

6.4 COPY TARGET RUN EDITION OVER TARGET PATCH EDITION (NEW STEP IN R12.2)

Copy Oracle E-Business Suite application directory (EBSapps) from the run edition file system to the patch edition file system in the Target System.

Create the TARGET PATCH EDITION file system ( in our case /u01/oracle/R122/fs1/), if not already existing

Also Unset the application Environment if already set.

$ cd /d01/oracle/finclonedb/fs2

$ cp -R EBSapps /d01/oracle/finclonedb/fs1

6.5 RUN ADCFGCLONE ON TARGET APPLICATION NODE PATCH EDITION (NEW STEP IN R12.2)

Log on to the patch edition file system in the Target System as the applmgr user and enter the following commands:

$ cd $COMMON_TOP/clone/bin

or

$ cd /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin

$ perl adcfgclone.pl appsTier

Here $COMMON_TOP refers to path in TARGET PATCH EDITION file system ( in our case $COMMON_TOP is /d01/oracle/finclonedb/fs1/EBSapps/comn)

The patch edition file system must be aware of the location of the run edition file system that will be configured in the next step. At the prompt “Location of Run System Context File”, enter the absolute path to the context file for the run edition file system that was created in the previous step (in our case path is /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml).

Also PATCH file system port pool will be different than RUN file system port pool.

Work Log >
[appclone@appclonehost bin]$ perl adcfgclone.pl appsTier
Copyright (c) 2011 Oracle Corporation
Redwood Shores, California, USA
Oracle E-Business Suite Rapid Clone
Version 12.2
adcfgclone Version 120.63.12020000.30
Enter the APPS password :
Running:
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper -encryptpwd /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../FMW/tempinfoApps.txt
Enter the Weblogic AdminServer password :
Running:
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../FMW/tempinfo.txt
Running:
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -classpath /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.clone.util.OPWrapper /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../FMW/EBSDataSource
Do you want to add a node (yes/no) [no] :
Running:
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -cp /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojdbc5.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/emCfg.jar oracle.apps.ad.context.CloneContext -e /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_16842.lst -stage /d01/oracle/finclonedb/fs1/EBSapps/comn/clone 2> /tmp/adcfgclone_16842.err; echo $? > /tmp/adcfgclone_16842.res
Log file located at /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/CloneContext_0923101958.log
Target System File Edition type [run] : patch
Enter the full path of Run File System Context file : /d01/oracle/finclonedb/fs2/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml
Provide the values required for creation of the new APPL_TOP Context file.
Target System Fusion Middleware Home set to /d01/oracle/finclonedb/fs1/FMW_Home
Target System Web Oracle Home set to /d01/oracle/finclonedb/fs1/FMW_Home/webtier
Target System Appl TOP set to /d01/oracle/finclonedb/fs1/EBSapps/appl
Target System COMMON TOP set to /d01/oracle/finclonedb/fs1/EBSapps/comn
Target System Instance Top set to /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost
Target System Port Pool [0-99] : 8
Checking the port pool 8
done: Port Pool 8 is free
Report file located at /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/admin/out/portpool.lst
Complete port information available at /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/admin/out/portpool.lst
UTL_FILE_DIR on database tier consists of the following directories.
1. /usr/tmp
2. /usr/tmp
3. /d01/oracle/finclonedb/11.2.0/appsutil/outbound/clonedb_dbclonehost
4. /usr/tmp
Choose a value which will be set as APPLPTMP value on the target node [1] :
Creating the new APPL_TOP Context file from :
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/context/apps/adxmlctx.tmp
The new APPL_TOP context file has been created :
/d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml
Log file located at /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/CloneContext_0923101958.log
Check Clone Context logfile /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/CloneContext_0923101958.log for details.
Running Rapid Clone with command:
Running:
perl /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/adclone.pl java=/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre mode=apply stage=/d01/oracle/finclonedb/fs1/EBSapps/comn/clone component=appsTier method=CUSTOM appctxtg=/d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml showProgress contextValidated=true
FMW Pre-requisite check log file location : /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log
Running: /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/FMW/t2pjdk/bin/java -classpath /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/engine.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereq.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraPrereqChecks.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstaller.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/OraInstallerNet.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/srvm.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl2.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/ext/jlib/ojdl-log4j.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/prereq/webtier/oui/jlib/share.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java oracle.apps.ad.clone.util.FMWOracleHomePreReqCheck -prereqCheckFMW -e /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -stage /d01/oracle/finclonedb/fs1/EBSapps/comn/clone -log /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/FMW/logs/prereqcheck.log
Beginning application tier Apply – Tue Sep 23 10:21:12 2014
/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/xmlparserv2.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojdbc6.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/java:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/oui/OraInstaller.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/oui/ewt3.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/oui/share.jar:/d01/oracle/finclonedb/fs1/FMW_Home/webtier/../Oracle_EBS-app1/oui/jlib/srvm.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/ojmisc.jar:/d01/oracle/finclonedb/fs1/FMW_Home/wlserver_10.3/server/lib/weblogic.jar:/d01/oracle/finclonedb/fs1/EBSapps/comn/clone/jlib/obfuscatepassword.jar oracle.apps.ad.clone.ApplyAppsTier -e /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/appl/admin/clonedb_appclonehost.xml -stage /d01/oracle/finclonedb/fs1/EBSapps/comn/clone -showProgress -nopromptmsg
Log file located at /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/admin/log/clone/ApplyAppsTier_09231021.log
| 100% completed
Completed Apply…
Tue Sep 23 10:36:45 2014
Looking for incomplete CLONE record in ad_adop_session_patches table
The CLONE record status is no rows selected
Updating incomplete CLONE record to COMPLETED
6.6 START APPLICATION FROM RUN FILE SYSTEM AND REVIEW

Set RUN file system environment:

. /d01/oracle/finclonedb/EBSapps.env RUN

Start Application:

$ cd $ADMIN_SCRIPTS_HOME

$ ./ adstrtal.sh

**require Apps User password and Weblogic AdminServer password

From EBS side you can do couple of CHECKS like below:

A) Login to the application. Check Apache, forms sessions are coming up fine.

B) Run Synchronize views for Oracle Workflow

Request Name = Workflow Directory Services User/Role Validation

p_BatchSize = 10000

p_Check_Dangling = Yes

Add missing user/role assignments = Yes

Update WHO columns in WF tables = No

C) Check concurrent manager processes.

D) Run simple request (like active users). Check if output and log files are opening fine.

E) If required, purge old log/out file from $APPLCSF/$APPLLOG and $APPLCSF/$APPLOUT directories as you may find that the output/log files are showing old dates.

*Application opened up fine and all the CM, Apache, forms process etc were running normal.*

PART 7 : FINISHING TASKS

Finishing tasks are mostly same as we used to do in R12.1.3 and are not explained in details in this guide. Also many of the finishing tasks can be customized tasks specific to your applciation. Please leave a comment if you want any explanation on any of the finishing tasks.

In our case finishing tasks that we performed are :

1. Updating required profile options

2. Updating Workflow configuration settings

Checking for any instance-specific data in the Oracle Workflow configuration of the Target System and update accordingly

3. Updating the SESSION_COOKIE_DOMAIN value in ICX_PARAMETERS

4. Re-Implement SSL and SSO configuration

You may be required to do/undo SSL/SSO in target system. In our case both source and target doesn’t have SSL/SSO.

5. Changing SYS/SYSTEM/APPS/SYSADMIN/OTHER ORACLE passwords as per business requirements

6. CHANGING DEFAULT EBS BRANDING

For ease of use you can change the default branding of Oracle EBS. This is described below:

A) Default Branding change

1. Login with system administrator responsibility

2. Navigate: Application —> Function

3. Query the function FWK_HOMEPAGE_BRAND

4. Replace the User Function Name with the desired text

5. Logout, login and the change should be visible immediate

B) Login page Welcome Message (on top)

Application Developer responsibility – > Application -> Messages

SEARCH FOR FND_SSO_WELCOME AND LANGUAGE US

PUT VALUE

CloneDB instance

<<NEEDS APPLICATION SERVICES/APACHE BOUNCE>>

C) Login page Message (on the page)

Login – Functional Administrator – Personalization TAB

Search for /oracle/apps/fnd/sso/login/webui/MainLoginPG in Document Path:

Click on Personalization Page icon

On next page, assure that Site:Include is tick marked. Press ‘Apply’

Click on “Personalize” for Page Layout

In ‘Title’ for ‘Site’ value put ‘CloneDB Instance’. Press Apply

D) Site Name Profile Change

Login > System Administrator > Profile System

Search for Site Name profile

Update it to required value at site level

BOUNCE APPLICATION SERVICES NOW TO REFLECT THE CHANGES.

ISSUES FACED

We faced only one issue during the process:

ISSUE 1:

While running adcfgclone on Target PATCH files system (STEP 6.5 ), adcfgclone ended with error message

INFO : Rapid Clone completed successfully , but the AutoConfig run recorded some errors.

Please review the AutoConfig section in the logfile. and Re-Run the entire cloning cycle , after fixing the problem.

Error message inside the log file >> /d01/oracle/finclonedb/fs1/inst/apps/clonedb_appclonehost/admin/log/clone/ApplyAppsTier_09221655.log

—————————————————————————————-

Enter value for 1: Enter value for 2: Enter value for 3: ERROR:

ORA-12514: TNS:listener does not currently know of service requested in connect

descriptor

SP2-0640: Not connected

Uploading Metadata file /d01/oracle/finclonedb/fs1/EBSapps/appl/ad/12.0.0/admin/template/adctxinf.tmp

Metadata file /d01/oracle/finclonedb/fs1/EBSapps/appl/ad/12.0.0/admin/template/adctxinf.tmp upload failed.

Check log file created by FNDCPUCF program.

ERRORCODE = 1 ERRORCODE_END

.end std out.

APP-FND-01564: ORACLE error 12514 in AFPCOA

Cause: AFPCOA failed due to ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

.

The SQL statement being executed at the time of the error was: and was executed from the file .

APP-FND-01564: ORACLE error 12514 in AFPCOA

Cause: AFPCOA failed due to ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

.

The SQL statement being executed at the time of the error was: and was executed from the file .

.end err out.

—————————————————————————————-

SOLUTION 1

Looking at error it was clear that adcfgclone process was not able to connect via listener to the database.

On checking the listener on the database node, it was not showing the registered database instance and status was UNKNOWN

——————————————–

$ lsnrctl services clonedb

LSNRCTL for Linux: Version 11.2.0.3.0 – Production on 23-SEP-2014 10:12:47

Copyright (c) 1991, 2011, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbclonehost.corp.com)(PORT=1530)))

Services Summary…

Service “clonedb” has 1 instance(s).

Instance “clonedb”, status UNKNOWN, has 1 handler(s) for this service…

Handler(s):

“DEDICATED” established:345 refused:0

LOCAL SERVER

The command completed successfully

————————————————————-

On checking it was found that the local_listener entry was missing in init/spfile.

SQL> show parameter local_listener
NAME TYPE VALUE
———————————— ———– ——————————
local_listener string

First of all de-register oracle_homes from the failed clone session

a) check ORACLE_HOMEs in ora inventory (check orac inventory location under /etc/oraInst.loc)

<REFHOME LOC=”/d01/oracle/finclonedb/fs1/FMW_Home/webtier“/>

</REFHOMELIST>

</HOME>

<HOME NAME=”OH1366755704″ LOC=”/d01/oracle/finclonedb/fs1/FMW_Home/webtier” TYPE=”O” IDX=”31″>

<DEPHOMELIST>

<DEPHOME LOC=”/d01/oracle/finclonedb/fs1/FMW_Home/oracle_common“/>

</DEPHOMELIST>

</HOME>

<HOME NAME=”OH455733530″ LOC=”/d01/oracle/finclonedb/fs1/FMW_Home/Oracle_EBS-app1” TYPE=”O” IDX=”32″/>

b) DETACH ORACLE_HOME

You will need to detach all the three oracle_home one by one.
$ cd /d01/oracle/finclonedb/fs1/FMW_Home/oracle_common/oui/bin

[appclone@appclonehost bin]$ ./runInstaller -detachhome ORACLE_HOME=/d01/oracle/finclonedb/fs1/FMW_Home/webtier
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 50267 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/oracle/oraInventory
‘DetachHome’ was successful.

[appclone@appclonehost bin]$ ./runInstaller -detachhome ORACLE_HOME=/d01/oracle/finclonedb/fs1/FMW_Home/Oracle_EBS-app1
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 50267 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/oracle/oraInventory
‘DetachHome’ was successful.

[appclone@appclonehost bin]$ ./runInstaller -detachhome ORACLE_HOME=/d01/oracle/finclonedb/fs1/FMW_Home/oracle_common
Starting Oracle Universal Installer…

Checking swap space: must be greater than 500 MB. Actual 50267 MB Passed
The inventory pointer is located at /etc/oraInst.loc
The inventory is located at /u01/oracle/oraInventory
‘DetachHome’ was successful.

3) DELETE DIRECTORY STRUCTURE

Delete both FMW_Home and inst directory which adcfgclone created.
$ cd /d01/oracle/finclonedb/fs1

$ ls -tlr
total 12
drwxr-x— 5 appclone dba 4096 Sep 22 16:49 EBSapps
drwxr-x— 3 appclone dba 4096 Sep 22 16:55 inst
drwxr-x— 13 appclone dba 4096 Sep 23 09:43 FMW_Home

$ rm -rf FMW_Home inst

4) SET MISSING LOCAL_LISTENER ENTRY
SQL> alter system set local_listener=clonedb_local scope= both;

System altered.

SQL> show parameter local_listener

NAME TYPE VALUE
———————————— ———– ——————————
local_listener string CLONEDB_LOCAL

5) Restart listener
$ lsnrctl stop clonedb
$ lsnrctl start clonedb

6) Check listener status now
lsnrctl services clonedb

LSNRCTL for Linux: Version 11.2.0.3.0 – Production on 23-SEP-2014 10:23:16

Copyright (c) 1991, 2011, Oracle. All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=dbclonehost.corp.com)(PORT=1530)))
Services Summary…
Service “clonedb” has 2 instance(s).
Instance “clonedb”, status UNKNOWN, has 1 handler(s) for this service…
Handler(s):
“DEDICATED” established:0 refused:0
LOCAL SERVER
Instance “clonedb”, status READY, has 1 handler(s) for this service…
Handler(s):
“DEDICATED” established:2 refused:0 state:ready
LOCAL SERVER
Service “ebs_patch” has 1 instance(s).
Instance “clonedb”, status READY, has 1 handler(s) for this service…
Handler(s):
“DEDICATED” established:2 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Looks OK now.

Now start the adcfgclone process on Target PATCH files system. It will work fine now

REFERENCE

Cloning Oracle E-Business Suite Release 12.2 with Rapid Clone (Doc ID 1383621.1)

Oracle® E-Business Suite Setup Guide Release 12.2 Part No. E22953-09

Brijesh Gogia

10 Comments

  1. Sanjana Roy Sanjana Roy

    Thanks for sharing the steps ..

  2. Rahul Rahul

    Following this document, never made me felt like that i am doing the R12.2.4 for the first time. Superb Documentation and explanation.

  3. Anonymous Anonymous

    Thanks for this,

    I have one doubt, in my source my run file system is fs2, can i copy this run file system fs2 to target run file system fs1?

    if i do like this, is their any impact?

    Thanks in advance.
    Rakesh B

  4. Shakti Shakti

    Hi Brijesh,
    We have a particular situation. We are on 12.2.4 and we need to perform full clone. We have a 4 node application clone and its all non-shared file system. While cloning as per the process we run adpreclone on source run FS and copy the application file system. As we have 9 NLS and lot of custom forms, one file system size is 100+ GB.
    If we are copying only run FS on only primary node and then adcfgclone.pl with dual fs option it copies internally on fs2. Same thing we need to perform on 3 other nodes. FMW_HOME configuration and copy of application fs (100*8=800 GB) is taking a lot of time.
    We are looking for methods to reduce the cloning time. Please suggest. Also, can we do following ?
    => Only copying the appl_top,common_top and 10.1.2 oracle_home (what we normally do) and do not touch the FMW_HOME on target and run autoconfig with backup XML file after DB clone is doen.
    => We are trying to figure out if FMW_HOME has some info stored in database which we need to update?
    Will this process work ? Please suggest.

  5. Nawab Sharief Nawab Sharief

    Hi Guys,
    No Need to redo the Patch File System Clone all over again.
    Just follow below steps it will resolve the issue:

    Solution:
    Before running Autoconfig on the patch file system the ebs_login trigger MUST be disabled
    After the successful completion of Autoconfig then ebs_login trigger MUST be re-enabled.

    This needs to be done as the SYSTEM schema user.
    a. Disable the ebs_login trigger using the following SQL.
    [oraupgr@sr1001odb005 dbs]$ sqlplus system/xxxxx
    SQL> alter trigger ebs_logon disable;
    [oraupgr@sr1001odb005 dbs]$ sqlplus ‘/as sysdba’
    SQL> show parameter spfile;
    NAME TYPE VALUE
    ———————————— ———– ——————————
    spfile string /u01test/TEST/db/tech_st/product/12.1.0/dbs/spfileUPGR.ora
    SQL> show parameter local_listener;

    NAME TYPE VALUE
    ———————————— ———– ——————————
    local_listener string

    SQL> alter system set local_listener=UPGR_LOCAL scope=both;
    SQL> show parameter local_listener;
    NAME TYPE VALUE
    ———————————— ———– ——————————
    local_listener string UPGR_LOCAL

    5) Restart listener
    $ lsnrctl stop UPGR
    $ lsnrctl start UPGR

    • Now run Autoconfig with the Patch Env sourced.

    AutoConfig completed successfully.

    b. Enable the ebs_login trigger using the following SQL.
    [oraupgr@sr1001odb005 dbs]$ sqlplus system/xxxxx
    SQL> alter trigger ebs_logon enable;

  6. Ashish Anand Ashish Anand

    Nice post….A good learning stuff!!!!

  7. June June

    Best post ever for R12.2 clone (better than Oracle Note). Thank you very much for your knowledge and generosity.

  8. Rajiv Kumar Jha Rajiv Kumar Jha

    Can someone share how much time the whole process takes in case we have R12.1.3 version
    And in case I have R12.2.9 version

  9. Emma Emma

    Great post. Very informative

  10. Anatha Krishnan Mishra Anatha Krishnan Mishra

    What are you doing now, as cloud is taking over?

Leave a Reply to Sanjana Roy Cancel reply